Operation Mode
Press this button to select your preferred operation mode.
Selecting any mode will enter it's own preset profile, adjustment of fan speed/swing angle can be made (except for
Dry mode)
When auto mode is selected, the air conditioner will operate automatically according to the sensed temperature.
(Set temperature can't be adjusted and will not be displayed as well)
Selecting any mode will enter it's own preset profile, adjustment of fan speed/swing angle can be made (except for
Power Button
Press this button to turn on/off the air conditioner.
Press this button to adjust the fan speed to: auto (AUTO), low (
), medium (
), high (
).
1. On AUTO speed, air conditioner will select the fan speed automatically according to the factory default setting.
2. On Dry mode, the fan speed will be set to low automatically and no adjustment can be made.
1. On AUTO speed, air conditioner will select the fan speed automatically according to the factory default setting.
2. On
Turbo Mode
Press this button to activate 
Turbo Mode
When Turbo mode is turned on, the air conditioner will run at a very high fan speed to rapidly cool down the room. This helps to bring the room temperature closer to the desired preset temperature as quickly as possible.
(Function only applicable under
Cool mode)
When
(Function only applicable under
Temperature adjustment buttons
To increase or decrease the set temperature by 1°C, simply press the "▲" or "▼" button once.
(Temperature cannot be adjusted in
auto mode)
On TIMER ON, TIMER OFF, or CLOCK settings, you can use the "â–²" or "â–¼" button to adjust the time.
(Please refer to the specific buttons labeled CLOCK, TIMER ON, and TIMER OFF for these settings.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
(Temperature cannot be adjusted in
On TIMER ON, TIMER OFF, or CLOCK settings, you can use the "â–²" or "â–¼" button to adjust the time.
(Please refer to the specific buttons labeled CLOCK, TIMER ON, and TIMER OFF for these settings.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Swing mode (Left to right)
Press this button to select your desired swing angle. Fan blow angle can be selected as shown below:
Swing mode (Up & down)
Press this button to select your desired swing angle (Left to right). Fan blow angle can be selected as shown below:
Automatic
On
the Horizontal louver will automatically swing up & down at maximum angle.
Fixed Position
On
the Horizontal louver will stop at the fixed position.
Fixed Angle
On
the Horizontal louver will swing at the specific fixed angle
To reset the swing angle to it's preset setting, press and hold the specified button for 2 seconds, and then release it.
Automatic
On
Fixed Position
On
Fixed Angle
On
To reset the swing angle to it's preset setting, press and hold the specified button for 2 seconds, and then release it.
Sleep button
Press this button to turn on/off sleep mode.
When sleep mode is turned on, the preset temperature will be automatically lowered over time and
Quiet mode will also be activated to ensure a quiet and condusive sleeping enviroment.
Take note:
1. When turning on the aircon Sleep mode is turned off by default.
2. If the Aircon is turned off, Sleep Mode will automatically be canceled.
3. This mode is only available on Cool mode .
4. This mode cannot be used with the Energy Saving Function concurrently.
I FEEL button
Press this button to turn on/off 
I FEEL mode.
When I FEEL mode is turned on, the remote control will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the detected temperature.
Take note:
1. Make sure that the remote control is within the range where the indoor unit can receive its signal.
2. Avoid placing the remote control near objects that are in high temperature or low temperature, as this can result in inaccurate temperature detection.
Tips: Place the remote control near the user when this function is activated to maximize the I FEEL function.
When I FEEL mode is turned on, the remote control will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the detected temperature.
Take note:
1. Make sure that the remote control is within the range where the indoor unit can receive its signal.
2. Avoid placing the remote control near objects that are in high temperature or low temperature, as this can result in inaccurate temperature detection.
Tips: Place the remote control near the user when this function is activated to maximize the
TIMER ON button
Press this button to set a timer to turn on the air conditioner.
Setting up a TIMER to turn on the Air Conditioner
Step 1: After pressing this button, the "
" icon disappears and the word "ON" on remote control start blinking. You can then use the "â–²" or "â–¼" button to adjust TIMER ON setting.
(Each time you press the "â–²" or "â–¼" button, the TIMER ON setting will increase or decrease by 1 minute.)
Step 2: Once you reached your desired settings, press "TIMER ON" button again to confirm it.
The word "ON" will stop blinking. "" icon will resumes displaying indicating the TIMER ON setting is activated.
Cancel the TIMER ON function:
Press the "TIMER ON" button when it is already activated, this will cancel the timing settings.
Take note:
1. Ensure clock time is set accurately before setting TIMER ON/OFF.
(The TIMER ON relies on the accurate clock time to activate the air conditioner at the desired time.)
2. TIMER ON and TIMER OFF functions can be used concurrently.
(e.g. you can schedule the air conditioner to turn on and off at different times according to your preferences or needs.)
3. TIMER ON or TIMER OFF functions can be set/adjust regardless of whether the air conditioner is currently turned on or off.
(This flexibility allows you to program the air conditioner's operation even when it is not currently in use.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Setting up a TIMER to turn on the Air Conditioner
Step 1: After pressing this button, the "
(Each time you press the "â–²" or "â–¼" button, the TIMER ON setting will increase or decrease by 1 minute.)
Step 2: Once you reached your desired settings, press "TIMER ON" button again to confirm it.
The word "ON" will stop blinking. "
Cancel the TIMER ON function:
Press the "TIMER ON" button when it is already activated, this will cancel the timing settings.
Take note:
1. Ensure clock time is set accurately before setting TIMER ON/OFF.
(The TIMER ON relies on the accurate clock time to activate the air conditioner at the desired time.)
2. TIMER ON and TIMER OFF functions can be used concurrently.
(e.g. you can schedule the air conditioner to turn on and off at different times according to your preferences or needs.)
3. TIMER ON or TIMER OFF functions can be set/adjust regardless of whether the air conditioner is currently turned on or off.
(This flexibility allows you to program the air conditioner's operation even when it is not currently in use.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
TIMER OFF button
Press this button to set a timer to turn off the air conditioner.
Setting up a TIMER to turn off the Air Conditioner
Step 1: After pressing this button, the "" icon disappears and the word "OFF" on remote control start blinking. You can then use the "â–²" or "â–¼" button to adjust TIMER OFF setting.
(Each time you press the "â–²" or "â–¼" button, the TIMER OFF setting will increase or decrease by 1 minute.)
Step 2: Once you reached your desired settings, press "TIMER OFF" button again to confirm it.
The word "OFF" will stop blinking. "" icon will resumes displaying indicating the TIMER OFF setting is activated.
Cancel the TIMER OFF function:
Press the "TIMER OFF" button when it is already activated, this will cancel the timing settings.
Take note:
1. Ensure clock time is set accurately before setting TIMER ON/OFF.
(The TIMER ON relies on the accurate clock time to activate the air conditioner at the desired time.)
2. TIMER ON and TIMER OFF functions can be used concurrently.
(e.g. you can schedule the air conditioner to turn on and off at different times according to your preferences or needs.)
3. TIMER ON or TIMER OFF functions can be set/adjust regardless of whether the air conditioner is currently turned on or off.
(This flexibility allows you to program the air conditioner's operation even when it is not currently in use.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Setting up a TIMER to turn off the Air Conditioner
Step 1: After pressing this button, the "
(Each time you press the "â–²" or "â–¼" button, the TIMER OFF setting will increase or decrease by 1 minute.)
Step 2: Once you reached your desired settings, press "TIMER OFF" button again to confirm it.
The word "OFF" will stop blinking. "
Cancel the TIMER OFF function:
Press the "TIMER OFF" button when it is already activated, this will cancel the timing settings.
Take note:
1. Ensure clock time is set accurately before setting TIMER ON/OFF.
(The TIMER ON relies on the accurate clock time to activate the air conditioner at the desired time.)
2. TIMER ON and TIMER OFF functions can be used concurrently.
(e.g. you can schedule the air conditioner to turn on and off at different times according to your preferences or needs.)
3. TIMER ON or TIMER OFF functions can be set/adjust regardless of whether the air conditioner is currently turned on or off.
(This flexibility allows you to program the air conditioner's operation even when it is not currently in use.)
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Clock button
Press this button to set clock time on your aircon remote controller
Step 1: Press the "CLOCK" button, the "" icon on remote control will blink, indicating that you are in clock setting mode
Step 2: Press "â–²" or "â–¼" button within 5s to adjust the clock time.
(Each press of "â–²" or "â–¼" button, clock time will increase or decrease 1 minute.)
Step 3: Once you have set the correct time, press "CLOCK" button to confirm the time. The "" icon stops blinking, indicating that the clock time has been set successfully.
Take note:
1. Clock time adopts 24-hour mode.
2. When setting the clock time or performing other operations, ensure that the interval between two consecutive button presses does not exceed 5 seconds. . Otherwise, remote control will exit the setting mode.
3. The process for setting the TIMER ON and TIMER OFF is the same as setting the clock time.
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Step 1: Press the "CLOCK" button, the "
Step 2: Press "â–²" or "â–¼" button within 5s to adjust the clock time.
(Each press of "â–²" or "â–¼" button, clock time will increase or decrease 1 minute.)
Step 3: Once you have set the correct time, press "CLOCK" button to confirm the time. The "
Take note:
1. Clock time adopts 24-hour mode.
2. When setting the clock time or performing other operations, ensure that the interval between two consecutive button presses does not exceed 5 seconds. . Otherwise, remote control will exit the setting mode.
3. The process for setting the TIMER ON and TIMER OFF is the same as setting the clock time.
Tips: Holding down "â–²" or "â–¼" button will accelerate the rate of numbers change, allowing you to quickly reach your desired setting.
Quiet button
Press this button to turn on/off Quiet mode
On Quiet mode there is 2 main type of Quiet mode you can choose from.
1. Auto Quiet mode (Remote will display "
" and "AUTO" signal)
2. Quiet mode (Remote display "" signal)
After powered on the aircon, the Quiet mode is OFF by default.
On Quiet mode there is 2 main type of Quiet mode you can choose from.
1. Auto Quiet mode (Remote will display "
2. Quiet mode (Remote display "
After powered on the aircon, the Quiet mode is OFF by default.
WiFi button
Press this button to activate the WiFi function.
When activated, the "WiFi" icon will be displayed on the remote control, indicating that the WiFi function is turned on.
Deactivating the WiFi function
Hold down the "WiFi" button for 5 seconds. The "WiFi" icon will disappear, indicating that the WiFi function has been turned off.
Resetting the WiFi module to its factory settings
Step 1: Ensure the WiFi function is deactivated.
Step 2: Press & Hold the "MODE" and "WiFi" buttons simultaneously for 1 second until you hear a beep.
This will restore the WiFi module to its original factory settings.
When activated, the "WiFi" icon will be displayed on the remote control, indicating that the WiFi function is turned on.
Deactivating the WiFi function
Hold down the "WiFi" button for 5 seconds. The "WiFi" icon will disappear, indicating that the WiFi function has been turned off.
Resetting the WiFi module to its factory settings
Step 1: Ensure the WiFi function is deactivated.
Step 2: Press & Hold the "MODE" and "WiFi" buttons simultaneously for 1 second until you hear a beep.
This will restore the WiFi module to its original factory settings.
Light button
Press this button to turn on/off the display light on the airconditioner.
icon on remote control will also be an indicator to show if the display light is turned on/off.
Health/Scavenging function
Press this button to turn on or turn off the health and scavenging functions when air conditioner is in operation status.
Mode Purposes
Scavenging mode
Scavenging function is used to remove odors in the room quickly.
Health Mode
Health mode brings in fresh air from outside the room and kills the bacteria but it is not available in all variants.
Sequence to enable Health/Scavenging mode on remote
Press 1st time - Start Health Mode
Press 2nd time - Start Scavenging mode
Press 3rd time - Start Health and Scavenging mode simultaneously
Press 4th time - To turn off Health and Scavenging mode
Mode Purposes
Scavenging mode
Scavenging function is used to remove odors in the room quickly.
Health Mode
Health mode brings in fresh air from outside the room and kills the bacteria but it is not available in all variants.
Sequence to enable Health/Scavenging mode on remote
Press 1st time - Start Health Mode
Press 2nd time - Start Scavenging mode
Press 3rd time - Start Health and Scavenging mode simultaneously
Press 4th time - To turn off Health and Scavenging mode
Temp button
By pressing this button, you can cycle through different temperature display options on the indoor unit's display.
The setting on remote control is selected circularly as below:
1. Indoor Set Temperature
Shows the temperature that is set for the air conditioner unit.
2. Indoor Ambient Temperature
Displays the current temperature of the room as detected by the air conditioner's sensors.
3. Outdoor Ambient Temperature
This function is not available on this model.
The setting on remote control is selected circularly as below:
1. Indoor Set Temperature
Shows the temperature that is set for the air conditioner unit.
2. Indoor Ambient Temperature
Displays the current temperature of the room as detected by the air conditioner's sensors.
3. Outdoor Ambient Temperature
This function is not available on this model.
Child Lock Function
Press "â–²" or "â–¼" simultaneously to turn on or turn off child lock function. When child lock function is on, " 
" icon is displayed on remote control.
If you operate the remote control during the child lock, the "" icon will blink three times without sending signal to the unit.
If you operate the remote control during the child lock, the "
Energy-Saving Function
Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to start up/turn off energy- saving function.
When energy-saving function is started up, "
" will be shown on remote control, and air conditioner will adjust the set temperature automatically according to ex-factory setting to reach to the best energy-saving effect.
Take note:
1. Under energy-saving function fan speed is defaulted at auto speed and it can't be adjusted.
2. Under energy-saving function, set temperature can't be adjusted and Turbo mode can not be activated.
3. Sleep mode and energy-saving function cannot operate concurrently. Etiher feature will stay dormant while the other is operating.
When energy-saving function is started up, "
Take note:
1. Under energy-saving function fan speed is defaulted at auto speed and it can't be adjusted.
2. Under energy-saving function, set temperature can't be adjusted and Turbo mode can not be activated.
3. Sleep mode and energy-saving function cannot operate concurrently. Etiher feature will stay dormant while the other is operating.
Resetting the Remote Control
Remove the batteries from your remote and let the display turn off before you put the batteries back into the remote.
The Remote controller will be set back to the orignial factory settings.
The Remote controller will be set back to the orignial factory settings.
Temperature Display Switchover Function
Ensure remote is under OFF status, press "▼" and "MODE" buttons simultaneously to switch temperature display between °C and °F.
X-FAN function
This function is designed to prevent the growth of mold by blowing air over the evaporator of the indoor unit after the air conditioner is turned off.
To activate this function, follow the steps below:
1. Ensure you are in eitherCool or Dry mode on your air conditioner.
2. Before turning off the air conditioner, press and hold the "FAN" button for 2 seconds.
3. After the " " icon is displayed on the remote control, proceed to turn off the air conditioner as usual.
(The "
" icon indicate that the function has been activated.)
Take note:
1. After activating this function, the inner fan of the air conditioner will continue to operate for approximately 10 minutes, even after you have turned off the air conditioner.
2. This function is not available in auto, fan or heat mode.
To activate this function, follow the steps below:
1. Ensure you are in either
2. Before turning off the air conditioner, press and hold the "FAN" button for 2 seconds.
3. After the " " icon is displayed on the remote control, proceed to turn off the air conditioner as usual.
(The "
Take note:
1. After activating this function, the inner fan of the air conditioner will continue to operate for approximately 10 minutes, even after you have turned off the air conditioner.
2. This function is not available in auto, fan or heat mode.